SF5 Package
The SF5
The SF5 is a 3D printable MP5 receiver set. It is compatible with OEM HK parts, PTR parts, RCM parts, and most of the other clone or US-made MP5 parts.
Thanks to it's design, the SF5 is a cost-effective way to get MP5 performance at a discount - because many of the complex and expensive parts of the MP5 are replaced with printed or AR15 parts,
the price to complete a build is rather cheap.
At the core of the SF5's design is its press-fit clambshell barrel mount - a simple, effective way to securely and rigidly attach the barrel and trunnion to the receiver.
Printed Parts Checklist:
REFER TO THE "BUILD CHECKLIST" FOLDER AFTER READING THROUGH THE "SHOPPING LIST" SECTION OF THE BUILD TUTORIAL PDF
Hardware Checklist:
Refer to the "Shopping List" section of the build tutorial pdf.
General Print Settings:
This receiver has been tested to work well in eSun PLA+. In any material similar or superior to PLA+, this receiver should work as well.
**Note that all STL files are oriented and scaled properly, and changing their scale or orientation may result in your parts not fitting/working properly. Especially with parts like the barrel mount and receivers, orientation is important!**
**Some cooling settings/filaments may cause some parts to warp slightly. This is generally acceptable, and will not negatively effect function. If warping seems extreme, refine cooling settings/print speed.**
**Note that you should follow these print settings in order to get the best possible results - changing nozzle size or layer height may cause you to have to hand fit things!**
My print settings for PLA+ were as follows:
Walls: 8 walls recommended
Nozzle: 0.4mm
Layer Height: 0.15mm
Temp: 230/60C
Infill: Ideally 100% - though if you use 8 walls you can use much lower infill - this has been tested at 20% infill and 8 walls, if you are trying to set a low weight record.
Supports: On/full (tree supports are ok)
No files or models Licensed for Commercial Use, Subscription, or Sale. Copyright 2023 Matt Larosiere.
Cooling fan: 20% normal, 50% on bridges. Off for the first 20 layers. Keep the fan low to prevent warp (this is a guideline, your settings may vary).
Bed Adhesion: gluestick or hairspray - since the big sections of this print have small footprints on the bed, using plenty of gluestick or hairspray is recommended.
All other settings can/should be left as default or whatever you know works best with your printing setup
STEP/SF5 STEP Master.stp 44.10 MiB SF5 Build Tutorial.pdf 11.06 MiB Add-Ons/Swarmtech Folding Brace/README.txt 266 B Add-Ons/Swarmtech Folding Brace/Swarmtech Folding Brace Instructions.pdf 143.12 KiB Build Checklists/5 Build.txt 655 B Build Checklists/10-40 Build.txt 696 B Build Checklists/10-40 K Build.txt 719 B Build Checklists/K Build.txt 924 B Build Checklists/Long-Short Build.txt 679 B Build Checklists/RS Build.txt 683 B Build Checklists/Short-Long Build.txt 683 B Build Checklists/URS Build.txt 685 B Images/SF5 Party.jpg 2.38 MiB README.txt 2.46 KiB STEP/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 Ejector Printed Spec.stp 104.41 KiB STEP/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 End Nut Cover.stp 23.61 KiB STEP/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 Swarm Brace Button.stp 88.60 KiB STEP/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 Swarm Brace.stp 1.02 MiB STEP/Barrel Mounts/SF5 Barrel Mount PTR Spec Left.stp 74.60 KiB STEP/Barrel Mounts/SF5 Barrel Mount PTR Spec Right.stp 74.89 KiB STEP/Barrel Mounts/SF5 Barrel Mount RCM Spec Left.stp 76.94 KiB STEP/Barrel Mounts/SF5 Barrel Mount RCM Spec Right.stp 77.37 KiB STEP/Charging Handles/SF5 Charging Handle Type 1.stp 351.27 KiB STEP/Charging Handles/SF5 Charging Handle Type 2.stp 338.64 KiB STEP/Charging Rods/SF5 Charging Rod 10-40 Spec.stp 180.55 KiB STEP/Charging Rods/SF5 Charging Rod K 10-40 Spec.stp 222.68 KiB STEP/Charging Rods/SF5 Charging Rod K Spec.stp 161.38 KiB STEP/Charging Rods/SF5 Charging Rod LS Spec.stp 152.17 KiB STEP/Charging Rods/SF5 Charging Rod.stp 160.82 KiB STEP/Endcaps/Pic Rail Endcaps/Socket Nut Endcaps/SF5 Endcap K Spec SKT Nut.stp 525.93 KiB STEP/Endcaps/Pic Rail Endcaps/Socket Nut Endcaps/SF5 Endcap SKT Nut.stp 524.65 KiB STEP/Endcaps/Pic Rail Endcaps/Socket Nut Endcaps/SF5 Endcap URS Spec SKT Nut.stp 522.04 KiB STEP/Endcaps/Pic Rail Endcaps/Standard Nut Endcaps/SF5 Endcap K Spec STD Nut.stp 453.91 KiB STEP/Endcaps/Pic Rail Endcaps/Standard Nut Endcaps/SF5 Endcap STD Nut.stp 452.52 KiB STEP/Endcaps/Pic Rail Endcaps/Standard Nut Endcaps/SF5 Endcap URS Spec STD Nut.stp 454.53 KiB STEP/Endcaps/Swarmtech Folding Brace Endcaps/Socket Nut Endcaps/SF5 Endcap K Spec SKT Nut - Swarm Brace Mod.stp 968.39 KiB STEP/Endcaps/Swarmtech Folding Brace Endcaps/Socket Nut Endcaps/SF5 Endcap SKT Nut - Swarm Brace Mod.stp 967.08 KiB STEP/Endcaps/Swarmtech Folding Brace Endcaps/Socket Nut Endcaps/SF5 Endcap URS Spec SKT Nut - Swarm Brace Mod.stp 972.39 KiB STEP/Endcaps/Swarmtech Folding Brace Endcaps/Standard Nut Endcaps/SF5 Endcap K Spec STD Nut - Swarm Brace Mod.stp 885.21 KiB STEP/Endcaps/Swarmtech Folding Brace Endcaps/Standard Nut Endcaps/SF5 Endcap STD Nut - Swarm Brace Mod.stp 882.45 KiB STEP/Endcaps/Swarmtech Folding Brace Endcaps/Standard Nut Endcaps/SF5 Endcap URS Spec STD Nut - Swarm Brace Mod.stp 890.20 KiB STEP/Handguard Add-Ons/Foregrip Mount KF5 AR15 Grip.stp 100.15 KiB STEP/Handguard Add-Ons/Handguard Hole Cover KF5.stp 91.26 KiB STEP/Handguard Add-Ons/Pic Rail Mount KF5 Handguard.stp 87.66 KiB STEP/Handguards/SF5 Handguard K Spec - Trilug-Suppressor.stp 657.72 KiB STEP/Handguards/SF5 Handguard K Spec.stp 677.66 KiB STEP/Handguards/SF5 Handguard URS Spec.stp 699.39 KiB STEP/Handguards/SF5 Handguard.stp 747.73 KiB STEP/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver - Web Cut Binary Compatible.stp 1.75 MiB STEP/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver - Web Cut.stp 1.66 MiB STEP/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver Binary Compatible.stp 1.67 MiB STEP/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver.stp 1.58 MiB STEP/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver - Binary Compatible.stp 2.00 MiB STEP/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver - Web Cut Binary Compatible.stp 2.08 MiB STEP/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver - Web Cut.stp 2.03 MiB STEP/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver.stp 1.97 MiB STEP/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec Binary Compatible Web Cut.stp 1.25 MiB STEP/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec Binary Compatible.stp 1.17 MiB STEP/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec Web Cut.stp 1.22 MiB STEP/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec.stp 1.14 MiB STEP/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec Binary Compatible Web Cut.stp 1.24 MiB STEP/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec Binary Compatible.stp 1.15 MiB STEP/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec Web Cut.stp 1.22 MiB STEP/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec.stp 1.14 MiB STEP/Mag Catch Parts/9mm/SF5 Mag Release Paddle 9mm Spec.stp 140.82 KiB STEP/Mag Catch Parts/9mm/SF5 Printed Mag Catch 9mm.stp 62.68 KiB STEP/Mag Catch Parts/9mm/SF5 Printed Mag Catch Button 9mm.stp 17.06 KiB STEP/Mag Catch Parts/9mm/SF5 Printed Mag Catch Paddle Spec 9mm.stp 97.27 KiB STEP/Mag Catch Parts/10-40/SF5 Mag Release Paddle 10mm Spec.stp 166.22 KiB STEP/Mag Catch Parts/10-40/SF5 Mag Release Paddle 40SW Spec.stp 161.43 KiB STEP/Upper Receivers/SF5 Upper Receiver - No_Support_Legs.stp 1.09 MiB STEP/Upper Receivers/SF5 Upper Receiver K Spec - No_Support_Legs.stp 1.14 MiB STEP/Upper Receivers/SF5 Upper Receiver K Spec.stp 1.20 MiB STEP/Upper Receivers/SF5 Upper Receiver.stp 1.15 MiB STL/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 Ejector Printed Spec.stl 377.91 KiB STL/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 End Nut Cover.stl 389.34 KiB STL/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 Swarm Brace Button.stl 272.64 KiB STL/Add-Ons (Ejector, Nut Cover, Brace Parts, etc)/SF5 Swarm Brace.stl 7.93 MiB STL/Barrel Mounts/SF5 Barrel Mount PTR Spec Left.stl 814.83 KiB STL/Barrel Mounts/SF5 Barrel Mount PTR Spec Right.stl 799.89 KiB STL/Barrel Mounts/SF5 Barrel Mount RCM Spec Left.stl 802.33 KiB STL/Barrel Mounts/SF5 Barrel Mount RCM Spec Right.stl 802.33 KiB STL/Charging Handles/SF5 Charging Handle Type 1.stl 2.54 MiB STL/Charging Handles/SF5 Charging Handle Type 2.stl 2.00 MiB STL/Charging Rods/SF5 Charging Rod 10-40 Spec.stl 1.74 MiB STL/Charging Rods/SF5 Charging Rod K 10-40 Spec.stl 1.73 MiB STL/Charging Rods/SF5 Charging Rod K Spec.stl 1.69 MiB STL/Charging Rods/SF5 Charging Rod LS Spec.stl 1.78 MiB STL/Charging Rods/SF5 Charging Rod.stl 1.79 MiB STL/Endcaps/Pic Rail Endcaps/Socket Nut Endcaps/SF5 Endcap K Spec SKT Nut.stl 4.37 MiB STL/Endcaps/Pic Rail Endcaps/Socket Nut Endcaps/SF5 Endcap SKT Nut.stl 4.17 MiB STL/Endcaps/Pic Rail Endcaps/Socket Nut Endcaps/SF5 Endcap URS Spec SKT Nut.stl 4.35 MiB STL/Endcaps/Pic Rail Endcaps/Standard Nut Endcaps/SF5 Endcap K Spec STD Nut.stl 3.94 MiB STL/Endcaps/Pic Rail Endcaps/Standard Nut Endcaps/SF5 Endcap STD Nut.stl 3.75 MiB STL/Endcaps/Pic Rail Endcaps/Standard Nut Endcaps/SF5 Endcap URS Spec STD Nut.stl 3.91 MiB STL/Endcaps/Swarmtech Folding Brace Endcaps/Socket Nut Endcaps/SF5 Endcap K Spec SKT Nut - Swarm Brace Mod.stl 6.38 MiB STL/Endcaps/Swarmtech Folding Brace Endcaps/Socket Nut Endcaps/SF5 Endcap SKT Nut - Swarm Brace Mod.stl 6.20 MiB STL/Endcaps/Swarmtech Folding Brace Endcaps/Socket Nut Endcaps/SF5 Endcap URS Spec SKT Nut - Swarm Brace Mod.stl 6.33 MiB STL/Endcaps/Swarmtech Folding Brace Endcaps/Standard Nut Endcaps/SF5 Endcap K Spec STD Nut - Swarm Brace Mod.stl 5.97 MiB STL/Endcaps/Swarmtech Folding Brace Endcaps/Standard Nut Endcaps/SF5 Endcap STD Nut - Swarm Brace Mod.stl 5.78 MiB STL/Endcaps/Swarmtech Folding Brace Endcaps/Standard Nut Endcaps/SF5 Endcap URS Spec STD Nut - Swarm Brace Mod.stl 5.98 MiB STL/Handguard Add-Ons/Foregrip Mount KF5 AR15 Grip.stl 1.02 MiB STL/Handguard Add-Ons/Handguard Hole Cover KF5.stl 597.93 KiB STL/Handguard Add-Ons/Pic Rail Mount KF5 Handguard.stl 804.18 KiB STL/Handguards/SF5 Handguard K Spec - Trilug-Suppressor.stl 5.20 MiB STL/Handguards/SF5 Handguard K Spec.stl 4.67 MiB STL/Handguards/SF5 Handguard URS Spec.stl 4.67 MiB STL/Handguards/SF5 Handguard.stl 4.97 MiB STL/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver - Web Cut Binary Compatible.stl 10.00 MiB STL/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver - Web Cut.stl 9.73 MiB STL/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver Binary Compatible.stl 9.77 MiB STL/Lower Receivers/9mm/Button Only Lowers/SF5 Lower Receiver.stl 9.49 MiB STL/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver - Binary Compatible.stl 12.51 MiB STL/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver - Web Cut Binary Compatible.stl 12.73 MiB STL/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver - Web Cut.stl 12.52 MiB STL/Lower Receivers/9mm/Paddle Lowers/SF5 Paddle Lower Receiver.stl 12.28 MiB STL/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec Binary Compatible Web Cut.stl 8.80 MiB STL/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec Binary Compatible.stl 8.44 MiB STL/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec Web Cut.stl 8.57 MiB STL/Lower Receivers/10mm/SF5 Lower Receiver 10mm Spec.stl 8.21 MiB STL/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec Binary Compatible Web Cut.stl 8.58 MiB STL/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec Binary Compatible.stl 8.22 MiB STL/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec Web Cut.stl 8.54 MiB STL/Lower Receivers/40SW/SF5 Lower Receiver 40SW Spec.stl 8.18 MiB STL/Mag Catch Parts/9mm/SF5 Mag Release Paddle 9mm Spec.stl 976.84 KiB STL/Mag Catch Parts/9mm/SF5 Printed Mag Catch 9mm.stl 921.76 KiB STL/Mag Catch Parts/9mm/SF5 Printed Mag Catch Button 9mm.stl 826.35 KiB STL/Mag Catch Parts/9mm/SF5 Printed Mag Catch Paddle Spec 9mm.stl 1.12 MiB STL/Mag Catch Parts/10-40/SF5 Mag Release Paddle 10mm Spec.stl 1.20 MiB STL/Mag Catch Parts/10-40/SF5 Mag Release Paddle 40SW Spec.stl 1.17 MiB STL/Upper Receivers/SF5 Upper Receiver - No_Support_Legs.stl 5.18 MiB STL/Upper Receivers/SF5 Upper Receiver K Spec - No_Support_Legs.stl 5.44 MiB STL/Upper Receivers/SF5 Upper Receiver K Spec.stl 5.38 MiB STL/Upper Receivers/SF5 Upper Receiver.stl 5.15 MiB